Parts

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

The Jonesin' pedal is the little brother of the Safari pedal, designed using the same basic principles of extra hexagonal studs and a true dual concave DX style platform but with a slimmer body for a closer to the axle feel.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Bearings for Cane Creek AER headsets. - Aluminum Bearing

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Chromag's Squarewave grip is designed with performance and comfort as the paramount goals. The gentle bulge fits nicely in the cup of the hand to promote long ride comfort. The progressive tread is finest/softest where it meets the outer edges of the hand and coarsest under the meat of the palm for a balance of compliance and control over longer rides.

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g

Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

ABI Headset Bearing for new builds or replacements.

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

Ergon GD1 Evo slim grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders! - Ergonomic performance comfort grip - Reduces hand and wrist discomforts - Made in Germany

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy - N-11 chainrings are compatible with all 10 speed drivetrains, and compatible with FSA, SRAM and Shimano 11- speed drivetrains