Tires/Tubes

Whisky Parts Co. Tubeless Rim Tape.

Ranger is designed to be a set-it-and-forget-it tire. Tightly spaced center knobs set the pace, while open outer lugs devour corners and shed muck with ease, making the Ranger equal parts trail ace and XC dominator. Completing the package, multi-directional siping ensures the Ranger grabs hold, whether tackling technical climbs or flying into corners. The lean profile of the Ranger 2.0/2.25 provides optimal efficiency for XC racing, while the high-volume, openly-spaced Ranger 2.40 was created with trail riding in mind. Ranger outperforms in all conditions, without compromising along the way. - Multidirectional siping provides increased traction whether accelerating, braking, or cornering - Well-spaced lugs clear out quickly in wet conditions - Lightweight, rounded casing conserves energy and feels quick to respond

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Whether in gravel or cyclocross, one thing is for certain—course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all-conditions tread. At the heart of the design is a fast-rolling center ridge, designed to minimize rolling resistance while still providing confident braking traction. Cornering and off-camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces while still offering a solid effective edge for grass and loam terrain. If you are looking for that one tire to do it all, Terreno Mix is your choice! - Open shoulder lugs for secure off-camber traction - Traditional tread profile for smooth transitions across a broad range of terrain

Corsa inspired tread design, for paved surfaces and hard-packed gravel. The smooth Corsa inspired center rolls fast, while the side tread "scales" provide durable bite when cornering and braking. - Three compounds in the tread (3C) for increased wear life and grip - Functionalized GRAPHENE 2.0 compound delivers ultimate performance - Corsa-inspired smooth center tread minimizes rolling resistance - Gravel tire designed for paved surfaces and hard-pack terrains - Side tread “scales” provide dependable bite through corners, and when braking

An all-conditions road tire designed for training or race-day events. The Rubino Pro utilizes Vittoria's proprietary Graphene structure to offer a long service life, puncture protection, and responsive handling traits. - 150 TPI nylon casing - Graphene rubber compounds

Speed and traction Aggressive file tread, or super low-profile knob design? The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled “fish scale” design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance.

Martello hammers home the performance you expect on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? This is the ticket. How does the Martello deliver this level of performance? Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive-width siping. This last part is key and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers! - Moto-block square knobs offer stability and durability - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip

Enduro-inspired performance meets XC efficiency—for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions. - Graphene 2.0 compound reduces rolling resistance and increases range and battery life - Leading-edge steps for fast-rolling while still climbing better in technical terrain at slow speeds - Progressive sipe width for tactile grip on rocks and roots

e-Martello hammers home the performance you expect while extending your ride! Looking for the one tire to tackle a wide range of courses? This is the ticket. How does the Martello deliver this level of performance? Start with 4C Graphene compound, and top it off with a moto-inspired tread design with progressive-width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers! - Versatile, all-conditions e-Enduro tire - Moto-block square knobs offer stability and durability - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

The X-C-X is a Cross Country and Cyclocross tire designed for high-speed riding on medium to hard-packed trails. - Fast rolling long narrow center knobs for increased speed and ramped smaller knobs across tire give added traction and cornering control - Dual Compound is harder in the center for added durability and fast rolling while softer on the sides for enhanced cornering control

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- Size: 26 x 1-3/8 - ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width: 37mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

- Size: 650B x 35 – 43 - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 83g

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm